William L. Coney Blog: Spec Check: 2017 Most Wanted Drivers

One inch is a precise measurement, right? You would think, but no.

In the golf equipment industry, sometimes an inch isn't exactly an inch. For that matter, a degree isn't exactly a degree either. 9.5° of loft, that's fairly concrete, isn't it? Not so fast. In past years 9.5° could have meant anything from 9° to 11°. Units of measure that the rest of the world treats as absolutes, the golf equipment world often handles with all the precision of baseball's in the neighborhood play.

Spec sheets tell one story, but until you measure - consistently and accurately - it's hard to know exactly what you're swinging.

More Tools = More Data

Late last year we announced a partnership with Golf Mechanix, the industry leader in equipment measuring tools and gauges.

With our new suite of tools which, for the purposes of this post, includes a Digital Swing Weight Scale, Lie & Loft Guage, and a USGA Standard Ruler, we can provide even more details about the clubs we test.

As we continue to expand our testing program, it becomes even more important to understand the correlation between stated specs, actual specs, and the impact they have on performance.

THE DATA

The following table contains the measurements taken for the drivers included in our 2017 Most Wanted Driver Test. Where it makes sense to do so, we have provided both the manufacturer's stated specification alongside our actual measurements.

Before we get to the data, there are a few points that should be considered.

Every manufacturer has tolerances. While we've observed that clubs are being built closer to spec than in the past, manufacturers allow for ½° or more of wiggle room on loft and lie, and several grams worth of head weight.
Differences between stamped loft and the actual loft are very often intentional. Vanity lofting (manufacturing with more loft than suggested by the markings on the club) is intended to circumvent our ego-driven need to play less loft than many of us need.
In some cases, differences between spec and measured length can be attributed to how a given manufacturer measures. Some use USGA-standard 60° rulers; some don't. Some companies measure before the grip is installed, others measure from the sole to end of the grip. The reality is, there isn't even universal agreement on something as basic as how one should measure the actual finished length of a 45.5" driver.

Notes:
*AirForceOne does not specify swing weights
*AirForceOne is a glued hosel design, we did not measure the head separately
*Shafts were measured to the nearest 1/8". The 1/4" breakdown is coincidental
*All swing weights are in the 'D' range

OBSERVATIONS

The average weight of the heads measured was 197.4 grams.
- The 2017 TaylorMade M2 (~185.5 grams) was the lightest head we measured
- Our 10.5° Wilson FG Tour F5 was the heaviest (204.4g)
The average measured length of the drivers was 45.51" while the average spec length was slightly shorter at 45.47"
- Notably, the Callaway Epic Sub Zero Drivers we measured were a full 1/2" longer than spec
- The Air Force One Drivers were each 1/2" below spec, while the Cobra F7+ was nearly as short relative to spec
The longest drivers measured (46") include:
- Wilson D300 (2), PING G LS Tec (2), PING G SF Tec (1), TaylorMade M2 '17 (2), Callaway EPIC Sub Zero (2)
The shortest drivers measured (45") include:
- Srixon Z765 and Z565, Mizuno JPX 900, Cobra F7+, AFO DFX and DFX Tour
Our measurements suggest vanity lofting may be on the decline. The average stated loft is 9.91°, while the average measured loft is 9.92°
Swing Weight measurements showed the largest deviation from spec
- The average stated swing weight was D3.29, while the average measured swing weight was D3.66
- Almost all measured swing weights came in heavier than stated
  - The Mizuno JPX-900 was most off spec; 1.8 Swing Weight points heavier than spec.
- Given the number of factors that impact swing weight; the head (and any weight pieces), tip adapter, shaft, grip, and the glue and epoxy that hold everything together, I suppose greater variance is to be expected.

WHAT DOES THIS MEAN FOR YOU?

Understanding the actual static differences between clubs and how those differences influence performance is important. Across the averages of an entire test pool, the differences between clubs can appear minimal, but on an individual basis, these static factors often lead to significant performance differences. Unfortunately, despite what's often suggested, there's no single right answer - no right length, right loft, and right swing weight that's perfect for everyone. We're all, to varying degrees, different. Your best results will come when you find the combination of variables that works for your swing profile. A lesson probably wouldn't hurt either.